WPS 中继模式的启用

admin

原文请参考官网wiki

http://wiki.mikrotik.com/wiki/Manual:Interface/Wireless#WPS_Server

那我这边就要做简化的教程：
WPS Server:必须满足2个条件

• push-button - WPS is activated by pushing physical button on the board (few boards has such button marked on the board case/label)
  简单的说就是你要开启WPS按钮功能
• WPS Server is active only when wireless AP interface has Pre-Shared Key Authentication (PSK) enabled. It is possible to configure this mode for the Virtual AP interfaces as well.
  无线认证必须开启PSK认证。
  

WPS Client:非常简单
CLI:
/interface wireless setup-repeater
WinBox:
[setup repeater]自动完成。

即完成中继模式的启用。